Blog · Penalties

Penalties and backcharges reduce the contract value: the 945,000 example

A delay penalty or a backcharge is not retention. It is money you will never be paid, so it comes off the value of the supply and its VAT is never charged, whichever way you work out the claim.

By , founder of Mizarah, who ran a UAE joinery workshop for 13 years · 7 minute read · Published · Last updated

The problem in one line

Treat a penalty like retention and you declare VAT on money you were never paid: 5,000 of it on a 100,000 penalty.

Most contractors have had a claim come back lighter than it went out. A delay penalty. A backcharge for cleaning, or for a damaged door the main contractor says was yours. Some of these you argue, and some you accept because the job matters more than the argument.

Once a penalty is accepted, the VAT question is simpler than it looks, as long as you keep it apart from retention. Both sit in the deductions block of a claim, but for VAT they work in opposite ways.

A penalty is not retention

Retention is your money, held back and paid later. A penalty is money you will never receive, and the VAT follows from that difference.

A penalty, a delay charge or a backcharge reduces the value of the contract. So it reduces the taxable value under both methods, and it carries no VAT at any later point. There is nothing to release and nothing left to declare.

Three deductions, three VAT treatments
DeductionWhat it isIts VAT
RetentionPart of the price, paid laterDeclared once: at the release before VAT, on the claims after VAT
Advance recoveryMoney already receivedDeclared once, on the advance tax invoice
Penalty or backchargeA cut in the contract valueNever charged: it comes out of the taxable value

Put another way: retention and the advance are timing. The money moves earlier or later, and its VAT is declared once, at one end or the other. A penalty is not timing. The money never moves at all, so there is no VAT to place anywhere.

The 945,000 example, both ways

Take a contract of 1,000,000 with a 10% penalty of 100,000. The supply is now worth 900,000, and its VAT is 45,000. Both methods arrive there.

Deductions before VAT
  1. Contract1,000,000.00
  2. −Penalty 10%100,000.00
  3. =Taxable amount900,000.00
  4. +VAT 5%45,000.00
  5. =Total945,000.00
Deductions after VAT
  1. Contract1,000,000.00
  2. +VAT 5%50,000.00
  3. =Including VAT1,050,000.00
  4. −Penalty with its VAT105,000.00
  5. =Total945,000.00

VAT payable on this invoice: 50,000.00 − 5,000.00 = 45,000.00

A 1,000,000 contract with a 10% penalty: 945,000 to pay and 45,000 of VAT, either way.
A 10% penalty
1,000,000 contract
LineBefore VATAfter VAT
Contract1,000,000.001,000,000.00
VAT on the contract—50,000.00
Less penalty−100,000.00−105,000.00
VAT on the net45,000.00—
Total945,000.00945,000.00

After VAT, the 105,000 is the penalty with its VAT. The invoice still shows 50,000 of VAT on its first VAT line, because that is 5% of the work. But the VAT payable on the invoice is 45,000, not 50,000. The 5,000 inside the penalty is not charged, because the client is not paying it.

If you treat the penalty like retention and leave it in the VAT base, you declare 50,000 and collect VAT on only 900,000. The 5,000 difference comes out of your pocket.

How it prints, and the row that makes it add up

On a tax invoice the deductions print in the order the VAT was worked out, and the VAT line is always 5% of the figure directly above it. Before VAT that is plain:

Tax invoice, deductions before VAT
1,000,000 contract · 10% penalty
LineAmount
Total before VAT1,000,000.00
Less: Penalty−100,000.00
Taxable amount900,000.00
VAT (5%)45,000.00
Total945,000.00

After VAT, the tax block needs one more row. Without it, the VAT line says 50,000, the return says 45,000, and nobody reading the invoice can see why.

Tax invoice, deductions after VAT
1,000,000 contract · 10% penalty
LineAmount
Total before VAT1,000,000.00
VAT (5%) on 1,000,000.0050,000.00
Less: VAT on penalty−5,000.00
VAT payable on this invoice45,000.00
Total including VAT1,050,000.00
Less: Penalty−105,000.00
Total945,000.00

Check it the same way as any after-VAT invoice. The tax block: 50,000 − 5,000 = 45,000. The money: 1,000,000 + 50,000 − 105,000 = 945,000.

A penalty on a claim with an advance and retention

Real claims carry more than one deduction. Here is claim 1 of the reference contract (300,000 of work, a 30% advance, 10% retention) with a 5% delay penalty on top.

Claim 1 with a 5% delay penalty
300,000 certified · 30% advance · 10% retention
LineBefore VATAfter VAT
Work certified300,000.00300,000.00
VAT on the work—15,000.00
Less advance (30%)−90,000.00−94,500.00
Less retention (10%)−30,000.00−31,500.00
Less delay penalty (5%)−15,000.00−15,750.00
VAT on the net8,250.00—
Payable173,250.00173,250.00

After VAT the claim declares 15,000 − 4,500 − 750 = 9,750: the VAT on the work, less the VAT already declared on the advance, less the VAT inside the penalty. Before VAT it declares 8,250, and the gap of 1,500 is the retention's VAT, which waits for the release.

In this example the retention is 10% of the work certified, not of the work less the penalty. Mizarah works it the same way. Follow what your own contract says.

Before you accept one, pin down four things

Arguments about penalties are often less about whether the penalty is fair than about what exactly it is. A note on a certificate that says "less delay penalty" leaves too much open. Before it goes on your claim, get these answered in writing:

  1. The amount, or the percentage and what it is a percentage of: the whole contract, this claim, or the work left.
  2. Whether a fixed figure includes VAT or not.
  3. Which claim it comes off, so it is taken once and not again on the next certificate.
  4. Whether it is final, or still under discussion. Only an agreed penalty belongs on a tax invoice.

The third point catches more people than you would think. A penalty that sits on the main contractor's running certificate can appear on every certificate after it, as part of the cumulative figures. Take it once, on the claim it belongs to, and check that your next claim does not take it again.

A fixed backcharge: which number did you type?

Backcharges often arrive as a round figure: 10,500 for cleaning, say. Before VAT, a fixed amount is an amount before VAT. After VAT it includes VAT. The same typed number is a different deduction under each method.

A fixed backcharge of 10,500
300,000 claim · no advance or retention, to keep it short
LineBefore VATAfter VAT
Work certified300,000.00300,000.00
VAT on the work—15,000.00
Less backcharge−10,500.00−10,500.00
Taxable value289,500.00290,000.00
VAT declared14,475.0014,500.00
Payable303,975.00304,500.00

After VAT the 10,500 is read as 10,000 plus 500 of VAT, so the claim declares 15,000 − 500 = 14,500.

So before you type a backcharge into a claim, find out whether the main contractor's figure includes VAT. If theirs does and your method reads it as a figure before VAT, the two of you will be 525 apart on this one claim, and the conversation about why will take longer than the claim did.

Mizarah claim editor: a discount on the whole invoice, an Add a deduction (penalty, backcharge) button, and the Deductions and VAT choice between deductions before VAT and deductions after VAT.
In Mizarah's claim editor, Add a deduction (penalty, backcharge) sits with the other deductions, and one Deductions and VAT choice covers all of them. Local test data, invented names.
HOW MIZARAH HANDLES ITTRUE OF THE PRODUCT TODAY

How Mizarah handles it.

In Mizarah, Add a deduction (penalty, backcharge) puts a named deduction on a claim, as a percentage or a fixed amount. It follows the invoice's method like every other deduction: a fixed amount is read as before VAT when deductions come off before VAT, and as including VAT when they come off after. Under both, it comes out of the taxable value.

The tax invoice prints it in the order the VAT was worked out. After VAT it adds its own row, Less: VAT on penalty (or whatever you named the deduction), so the VAT payable on this invoice can be checked on the page. A credit note raised from the invoice copies its method, so a reversal unwinds the VAT on the same basis.

QUESTIONS6 ANSWERS

Common questions.

Does a penalty reduce the VAT on my claim?
Yes, under both methods. A penalty or backcharge reduces the contract value, so the VAT is worked out on the value after it. On a 1,000,000 contract with a 10% penalty the VAT is 45,000, not 50,000.
Is a backcharge treated like retention?
No. Retention is part of the price and comes back later, with its VAT declared once. A backcharge is never paid, so its VAT is never charged and there is nothing to release.
Does the penalty's VAT come back later, like retention?
No. There is no later document for a penalty. Its VAT is not charged on the claim that takes it off, and that is the end of it.
Can a penalty be a fixed amount instead of a percentage?
Yes. Before VAT a fixed amount is read as an amount before VAT. After VAT it is read as including VAT. Check which way the main contractor's figure is meant before you type it.
Should the penalty appear on the tax invoice?
Yes, as its own deduction row, so the client and your tax agent can see why the taxable amount is lower than the work certified. After VAT it also gets a row taking its VAT off the VAT on the work.
What does the invoice show after VAT?
The VAT on the work, a row taking off the VAT on the penalty, and the VAT payable on this invoice. Then the total including VAT, less the penalty with its VAT, and the total to pay.

Official sources

Read next on this site

Practical guidance, not tax advice. The figures are worked examples, not anyone’s real contract. Check how the rules apply to your own contracts with your tax agent.

TRY IT ON YOUR OWN CONTRACT14 DAYS FREE · NO CARD

Put one of your own claims through it.

Start the free 14-day trial at mizarah.com and bill a contract you already know the answer to. Or work one bill out first with the free progress bill calculator, either VAT method, no sign-up.